BlogProduction

Packaging costing: from box size to price per print run.

The cost of a package comes from its blank and material, plus waste, operations and the fixed costs of the run divided by the quantity. That’s why the same box costs differently at 1,000 and at 5,000 units.

Why packaging is costed differently

For most products, the bill of materials is fixed. In packaging, every enquiry brings new dimensions, material, number of colours and run length. Costing is redone for almost every quote.

That’s why in many print and packaging shops the costing lives in one Excel file that only one person understands. Every quote waits for them.

The problem isn’t that Excel calculates wrongly. It’s that the formulas are hidden, material prices are updated by hand and nobody knows which version of the file is right.

From box size to blank

Everything starts with the blank: the flat shape the box is folded from. For a standard flapped carton, blank length is twice the length plus twice the width plus a glue flap. Blank height is the box height plus the flaps.

For example, a 40 × 30 × 20 cm carton with a 3 cm glue flap and 15 cm flaps has a blank of about 143 × 50 cm. That’s 0.715 m² of board per unit.

The maths is 2 × 40 + 2 × 30 + 3 = 143 cm for the length and 20 + 2 × 15 = 50 cm for the height. Each flap is half the width so the flaps meet in the middle.

The formula depends on the box style. Write it down once for every style you make and use it every time.

Enquiry dimensions are usually internal. Board thickness is added at the folds. With heavier board, the difference in blank size becomes noticeable.

Material usage and waste

A blank rarely fits a sheet with nothing left over. How many blanks you get per sheet or across the roll width decides the real usage.

  • Cutting waste: the trim around the blank.
  • Set-up waste: sheets used up while getting the machine running.
  • Scrap: units with print, cutting or gluing defects.

Cutting waste is a percentage per unit. Set-up waste is fixed per run. Mix them up and short runs come out underpriced.

Sometimes a small change in size fits two blanks per sheet instead of one. Good costing shows this and gives you a reason to talk to the customer before quoting.

Ink is costed by coverage: what share of the area is printed and in how many colours. A full flood costs far more than a logo in the corner. To keep it simple, use a few coverage bands instead of an exact calculation for every artwork.

Fixed and variable costs

This is the key to pricing by run length. Variable costs grow with every unit: board, ink, machine time. Fixed costs are paid once per run.

  • Printing plate, if it’s new.
  • Cutting die, if it’s new.
  • Machine set-up: time and test sheets.
  • Prepress and artwork approval.

On a repeat order, the plate and die usually exist already. That’s why you need to know where they are, who owns them and what condition they’re in.

Decide how a new plate is paid for: built into the first run or invoiced separately. Both work, as long as the quote makes clear which one it is.

Plates and dies wear out. Record how many times each one has been used so you know when a replacement is due and can include it in the next quote in time.

Example: a 40 × 30 × 20 cm carton

For example: two-colour print on corrugated board. All prices are hypothetical and only illustrate the method.

  • Board: 0.715 m² + 12% cutting waste ≈ 0.80 m² × 0.45 €/m² = 0.36 €.
  • Ink: 0.03 € per unit.
  • Operations (printing, die-cutting, gluing): 0.05 € per unit of machine time and labour.
  • Overhead share: 0.04 € per unit.
  • Total variable cost: 0.48 € per unit.
  • Fixed per run: new plate 120.00 €, set-up 60.00 €, test sheets 15.00 €, total 195.00 €.

Cost per unit at different run lengths:

  • 1,000 pcs: 0.48 € + 195.00 € / 1,000 = about 0.68 €.
  • 2,500 pcs: 0.48 € + 195.00 € / 2,500 = about 0.56 €.
  • 5,000 pcs: 0.48 € + 195.00 € / 5,000 = about 0.52 €.

On a repeat order without a new plate, fixed costs drop to 75.00 € and 1,000 units cost about 0.56 €. That difference should be visible in the quote.

These are costs, not prices. Your chosen margin goes on top. If board goes up 10%, variable cost rises by about 0.036 € per unit, which is 180.00 € on 5,000 units.

A quote with several print runs

The customer almost always asks “and what if we order more?”. A quote with three run lengths in one document answers in advance and shows why the longer run is better value.

It also makes your own decisions easier. If the customer orders regularly, a blanket order with a longer run and call-offs in parts can work well for both sides.

How we do it at Leanovix

For packaging and print, the costing calculator by size, material and waste, plate and die tracking and quotes with several print runs are the layer we build for you, on request. The formulas come from your Excel and from the people who do your pricing. The general method is also covered in the article on product costing.

Frequently asked questions about packaging costing

Why is a short print run so much more expensive per unit?

Because the plate, die and set-up are paid once per run. With fewer units, each one carries a bigger share of those costs.

How do you calculate board usage for a carton?

Work out the blank area and add cutting waste. Then check how many blanks fit a sheet or roll, because that decides the real usage.

Should the printing plate be charged on every order?

A new plate is charged on the first order or invoiced separately. On a repeat order with the same plate, it isn’t charged again.

Show us how you work today.

In 30 minutes we’ll find the process that costs you the most and see how it would look in Leanovix.

Book a demo